We compete in FIRST Tech Challenge, the international robotics programme for 12 to 18 year olds. Each season FIRST releases a new game, and we have a few months to design, build and program a robot to play it.
Our mission is to develop the next generation of engineers by pushing the limits of robotics and inspiring others to do the same. Eleven of us work in four crews: mechanical, programming, CAD and outreach.
Leads the team and robot design; first contact for sponsors, schools and press.
ArthurFinance lead
Budget and sponsor outreach.
FelixFinance, CAD and outreach
The pollen shooter CAD, the brochure and the team’s look.
N
NicolasProgramming lead
Java, Pedro Pathing and the flywheel control loop.
D
DarraghHardware and CAD
The turret and shooter.
Team photoAdd a wide photo of the whole team here.
Inside the robot.
Our 2026–27 BIOBUZZ robot, system by system. Pick a number on the drawing or a page from the contents to open it.
Placeholder drawing until our CAD render is ready.
CAD renderTo come once the design is frozen
Mechanical · 01
Drivetrain.
A mecanum drivetrain: four motors, four angled-roller wheels, and the robot can move in any direction without turning first.
Key numbers
Chosen over swerve after a season-long debate
Mecanum
Drive motors, set to brake for precise stops
4
Drive modes: field-centric and robot-centric
2
Features
Why not swerve
Coaxial swerve would use four of our eight servos, leaving too few for the shooter and turret
Swerve is prone to over-current, and strong teams take half a season to tune it
The gain over mecanum in FTC is small
Why not omni wheels
Mecanum gives true holonomic drive; omni would not
Motors set to brake, not float, for more accurate stopping in autonomous and driver control
Drivers can switch between field-centric and robot-centric control mid-match
CAD renderTo come once the design is frozen
Mechanical · 02
Wheels.
Cast silicone wheels and hand-made wiring: what we build for our own robot, we also make in bulk and give to other UK teams for free.
Key numbers
For other UK FTC teams this season
Free
Buying at scale keeps the cost low
Bulk
Every wire terminated by trained members
Crimped
Features
Silicone wheels cast in moulds we design and print
Wiring looms crimped precisely, so they never damage another team’s robot
Members are trained before they make wiring for anyone else
Part of our national outreach for the BIOBUZZ season
CAD renderTo come once the design is frozen
Mechanical · 03
Shooter.
A compact turret with a counter-roller shooter, built to score pollen, the smaller 7.1 cm game piece, as fast as possible.
Key numbers
Pollen ball diameter (nectar is 9.15 cm)
7.1 cm
Balls the robot may hold at once
4
Target time between shots
0.1 s
Features
Counter-roller shooter, CAD nearly finished
An undershooter variant is being designed to compare
Turret on a thin lazy-Susan bearing, sized to the pollen ball
As compact as possible, so it fits the start-size limit
Shooter base being redesigned for rapid fire
Pollen-first strategy, decided from our game analysis
CAD renderTo come once the design is frozen
Electrical · 04
Electronics.
A REV Control Hub and Expansion Hub run every motor, servo and sensor, connected with looms we make and label ourselves.
Key numbers
REV hubs: Control and Expansion
2
Servo ports across the robot
8
Every cable, at both ends
Labelled
Features
REV Control Hub and Expansion Hub already on the bench
Hand-crimped looms, labelled at both ends so faults can be traced between matches
The same layout carries over to our outreach demo robot
CAD renderTo come once the design is frozen
Software · 05
Autonomous.
Thirty seconds with no drivers: the robot follows paths planned with Pedro Pathing, then the drivers take over for two minutes.
Key numbers
Autonomous period, code only
30 s
Path following with automatic tuning
Pedro v3
Control loop on the shooter flywheel
PIDF
Features
Written in Java on the FTC SDK, version-controlled on GitHub
Pedro Pathing v3 for autonomous paths
Its automatic tuning replaces weeks of manual tuning
PIDF control on the flywheel for accurate speed and faster spin-up
Limelight 3A camera under evaluation for aiming
We looked at YOLO detection but chose FTC’s built-in pipeline to protect loop times
Thread and loop-time optimisation as ongoing goals
Prototyping · 06
Wheel iterations.
Drag across the drawing to compare our first wheel with the one we use now.
First
Fully 3D-printed. Quick to make, but hard plastic grips the foam tiles poorly.
Now
Printed hub with a silicone tyre cast in our own mould. Soft tread, better grip.
Drawings stand in for photos of the real wheels.
FirstNow
The robot in renders.
Rendered straight from our CAD: the intake, the turret shooter and the goBILDA mecanum drive.
Under the lightsThree-quarter viewSide profileThe shotMecanum driveInside the turret
Done. New team formed for 2026–27, with a new robot and a new engineering portfolio.
Done. BIOBUZZ revealed at kickoff. We read the rules, agreed a strategy and started prototypes.
Ongoing since 2025–26.International mentoring. We give technical guidance and remote support to an overseas FTC team as they move to a fully custom robot.
Ongoing since 2025–26.UK FTC Discord. We help teams across the UK with questions about code, CAD, wiring and sponsorship.
Nothing with that status this month.
Ongoing, weekly.FIRST LEGO League mentoring. We coach FLL teams in our own schools and the local area, the programme many FTC students start in.
Done, following up. Asked Cambridge University engineering societies for mentors.
In progress. Looking for a practice space in Cambridge where the field can stay set up.
Done. Launched this website for sponsors, schools and new members.
Nothing with that status this month.
Planned, Sat 14 November, 10:00–12:00.Robot taster session. For primary schools in Cambridge. Children drive a robot and build a simple mechanism. Free.
Planned, Sat 28 November, 14:00–16:00.Silicone wheel clinic. For UK FTC teams, in person and online. Print a mould, mix the silicone and cast a set of tyres.
Planned. Design freeze. CAD finished, the build begins.
Nothing with that status this month.
Planned, Sat 5 December, 10:00–15:00.FLL coaching day. For local FIRST LEGO League teams before their regionals: robot runs, project feedback and judging practice.
Planned, Wed 16 December, 16:30–18:30.Open build night. For students thinking of joining. Spend an evening with each crew and see the robot up close.
Planned. Robot driving by the end of term.
Nothing with that status this month.
Planned, Sat 16 January, 10:00–13:00.Secondary build workshop. For secondary schools. Wire a motor, write a few lines of Java and drive the robot you helped build.
Planned, Sat 30 January, 18:00–19:30.Start an FTC team. For teachers and parents. What a team costs, how to find sponsors and how the season runs.
Planned, date set by FIRST UK.FLL regional volunteering. We volunteer as referees and queuers at our local FIRST LEGO League regional.
Dates set by FIRST UK. UK qualifying events begin.
Nothing with that status this month.
Planned, Sat 13 February, all day.Community robot demo. The competition robot on show at a Cambridge community event. Come and drive it.
Planned.Starter site for UK teams. Sponsorship resources and step-by-step guides to starting an FTC team.
Planned.Support from local leaders. Meetings with our MP, the council and university academics to build support for FTC in the region.
Nothing with that status this month.
Date set by FIRST UK. UK Championship, where teams earn places at international events.
Nothing with that status this month.
The goal. International events, if we qualify. The aim: the Inspire Award.
Nothing with that status this month.
If we qualify. International invitational events continue through early summer.
Nothing with that status this month.
Planned.Summer wheel-casting. Sessions for teams starting next season.
Nothing with that status this month.
Planned. Recruitment for 2027–28 and handover from leavers to new members.
Nothing with that status this month.
Planned. Off-season training before the 2027–28 kickoff.
Nothing with that status this month.
Sponsor a season
Metabotics relies entirely on donations. This season we are raising £23,350 to design, build and compete with our BIOBUZZ robot. In-kind support counts as sponsorship too.
Robot parts · £8,000Motors, servos, electronics, aluminium and the silicone for our wheels.
Registration · £6,750Season registration and entry to UK qualifiers and the UK Championship.
Manufacturing · £5,000Machined and printed parts, plus the free wiring and wheels we make for other teams.
Competition field · £2,600A full practice field so drivers train on the real thing.
Robot travel · £1,000Getting the team and robot to events.
A student-led FIRST Tech Challenge team in Cambridge, building robots that push what is possible and helping other teams do the same.
Team photoAdd a wide photo of the whole team, ideally with the robot.
Our mission
Metabotics exists to develop the next generation of engineers by pushing the limits of robotics and inspiring others to do the same. We nurture STEM talent inside the team, grow robotics opportunities across the region and the UK, and mentor teams around the world.
Our work does not stop at the field. Every breakthrough we make is meant to be a blueprint the rest of the student robotics community can use, which is why we share our CAD, give away wiring and wheels, and help new teams get started.
We are a new team for 2026–27, formed in August and named in September, with members from several Cambridge schools and sixth forms. Some of us have competed in FTC before; for others this is the first robot. Our goal this season is the Inspire Award.
Everyone belongs to a crew, and most of us help out in more than one.
PhotoMechanical
Mechanical
Builds the robot.
The mecanum drivetrain, the turret and shooter, and custom manufacturing: the silicone wheels and wiring we make for ourselves and give to other teams. Skills: Assembly, crimping, casting and testing.
PhotoProgramming
Programming
Makes it think.
Java on the FTC SDK, Pedro Pathing for autonomous, PIDF control for the flywheel and field-centric driving. Code lives on GitHub. Skills: Java, control loops, vision and path planning.
PhotoCAD
CAD
Designs it first.
Every part is modelled in Onshape before it is made, from the chassis to the pollen shooter. New members learn CAD from scratch with the rest of the crew. Skills: Onshape, 3D printing and renders.
PhotoOutreach
Outreach
Takes it further.
School talks and demos, FLL mentoring, sponsorship, the brochure and this website. Finance sits here too: every pound is tracked against the robot it buys. Skills: Design, writing, finance and public speaking.
Meet the team
Eleven students, Years 9 to 13. Photos are coming once we have done a proper team shoot.
YL
Yibo LiuTeam captain
Leads the team and robot design, teaches CAD and is the first contact for sponsors, schools and press.
ArthurFinance lead
Runs the budget and sponsor outreach, and contributes to CAD and outreach content.
FelixFinance, CAD and outreach
Works across CAD, finance, sponsorship and media. This season he is designing the pollen shooter and the team’s brochure, photography and public presence.
N
NicolasProgramming lead
Uses Java to bring the robot to life. Enjoys hard problems and seeing code turn into real movement on the field.
D
DarraghHardware and CAD
Designing the turret and shooter, and learning CAD from scratch this season.
Y
YuhanProgramming and finance
Writes code and leads much of the sponsor emailing.
S
SattvikManufacturing
Leads the free silicone wheels and wiring we make for other teams, and runs weekly FLL mentoring.
S
ShreyaOutreach
School talks, demos and community events.
SylvanOutreach and finance
Supports fundraising and outreach.
L
LizTeam member
Our newest member, helping wherever the team needs her.
Y
YiliangTeam member
Joined in September and learning the ropes across the crews.
We are looking for engineers, university students and academics who could give a few hours a month to help with design reviews, code and the engineering portfolio. We have asked Cambridge University engineering societies and would love to hear from anyone else.
Thanks to Allia Future Business Centre, we now have a permanent base with room for a full field. See our centre.
A 2,000 sq ft base at Allia Future Business Centre in north Cambridge, with room for a full field, our printers, and local FLL teams.
PhotoInside the centre
AlliaFuture Business Centre
Many thanks to Allia Future Business Centre for providing us with this space.
Before Allia we met in a library and a shopping-centre coworking space, packing up every session. A room where the field stays set up makes everything else on this page possible. Thank you for backing student engineering in Cambridge.
What's inside
The space is still being fitted out. This is what it is for.
PhotoThe practice field
The practice field
A full-size 12 ft × 12 ft FTC field, kept set up so drivers can practise every session.
PhotoBuild bench
Build bench
Where the competition robot and our outreach demo robot are assembled and repaired.
Photo3D printers
3D printers
For prototype parts, brackets and wheel moulds, as funding allows.
PhotoManufacturing corner
Manufacturing corner
Crimping wiring and casting silicone wheels, for us and for other UK teams, free.
PhotoCode corner
Code corner
Laptops and the driver station for autonomous routines and driver practice.
PhotoFLL table
FLL table
A FIRST LEGO League table that local FLL teams can use for free.
Visit us
Sponsors, parents, schools and anyone thinking of joining are welcome to drop in during a session. Let us know before you come so someone can show you round.
Address
Allia Future Business Centre, Kings Hedges Road, Cambridge CB4 2HY
Getting here
About 25 minutes by bike from the station; bike parking on site
Saturday15:00–18:00Full team: build, code, CAD and drive practice
We meet every Saturday afternoon; extra sessions are added before competitions.
MapLocation map to add
News and events
What's coming up, what we've done and where to find us. Dates marked provisional may still change.
Coming up
Nothing coming up here yet.
Earlier this season
Nothing here yet.
Every week
Outreach that doesn't stop between events.
Since 2025–26
International mentoring
Technical guidance and remote support for FTC teams overseas as they work through their engineering journey.
Since 2025–26
UK FTC Discord
We answer questions from teams across the UK about code, CAD, wiring and sponsorship.
Weekly
FIRST LEGO League mentoring
We coach FLL teams in our own schools and the local area, the programme many FTC students start in.
Our sponsors
Metabotics relies entirely on donations. We are raising £23,350 this season, and every contribution, whatever its size, lowers the barrier to competing.
Title and Diamond
£5,000 and above. These sponsors make the season possible.
Company logo
Company nameSponsor since 2026–27
Company logo
Company nameSponsor since 2026–27
Platinum and Gold
£1,000 to £3,000, funding parts, registration and travel.
Company logo
Company nameSponsor since 2026–27
Company logo
Company nameSponsor since 2026–27
Company logo
Company nameSponsor since 2026–27
Company logo
Company nameSponsor since 2026–27
Supporters
Silver, Bronze and in-kind help: materials, machining, printing, software and space.
Allia
Allia Future Business CentreIn kind: our workspace
Company logo
Company nameSponsor since 2026–27
Company logo
Company nameSponsor since 2026–27
Company logo
Company nameSponsor since 2026–27
Company logo
Company nameSponsor since 2026–27
Company logo
Company nameSponsor since 2026–27
Your logo could be here
Sponsoring Metabotics puts your company on the robot, our shirts, this site and our engineering portfolio, and helps students learn engineering by doing it.